sutton cycle works
sutton cycle works
  • Home
  • Products
  • FAQ
  • Photos
  • More
    • Home
    • Products
    • FAQ
    • Photos
  • Home
  • Products
  • FAQ
  • Photos

About the oil coolers

Oil cooler kits are made in the USA and available for the Honda XR650L, XR600, XL600R, XL600RM, and NX650 / Dominator.

  • A fully illustrated, step by step, easy to follow instruction manual is provided.
  • Oil cooler cores are available in powder coat black or bare aluminum.
  • The oil cooler core, guard, spacers, countersunk washers, and mount are made of aluminum.
  • All stainless steel hardware - nuts, bolts, washers, and hose clamps.
  • The cooler is isolated from vibration using weather and chemical resistant bushings.
  • The durable oil hose is abrasion, weather, and chemical resistant. Made in the USA with a 400 psi.,-40°F to +300°F rating.
  • The XR650L complete kit weighs 1 lb. 10 oz. Other models weigh slightly less.
  • This kit will fit the stock fuel tank with scoops, the Clarke, Acerbis, Aloop, and IMS tank as well. 
  • It works with "big fin" heads and FMF stainless head pipes and fits most aftermarket skid-plates.


Kind words from a customer:

"Just took her out for about a 3 hr hwy drive. Was running 70-75 mph the entire trip. Ambient temp was 90°F. It held a constant 225°F degrees almost the entire trip with one or two spikes at about 240°F pulling hills & headwinds, but the cooler was able to pull temps back to 225°F. It's definitely working. No more of those scary 275°F degree peaks anymore. You have a winner in this product."

Shop for oil coolers

This Kit Is For Closed Course Competition Use Only. Not Intended for Street Use. This kit requires the relocation of the stock smog pump located on the left side of the engine. I do not supply the parts to relocate the stock smog pump. You should always check your state's laws with regard to the use of aftermarket parts.

Copyright © 2022 sutton cycle works - All Rights Reserved.

  • Products
  • FAQ
  • Photos
  • Sitemap
  • contact